poolshark01 0 Report post Posted August 11, 2014 I have a 1998 242 cc with a 2011 venture dual tandem trailer. It has two rear bunks that cover the whole bottom of the boat, and one cross member with a v bunk on it. My question is with the boat all the way on (bow hook touching bow roller) should the boat be touching the cross member? mine is about a finger tip off the cross member. Also, I'm having the hardest time keeping the boat straight on the trailer when loading it. I've heard of changing the cross member with two center bunks, or installing guide polls. Which would work better? also this boat weights in a 5,200 lbs fully loaded. and my marine does not allow power loading. so diving the boat on will not work, that's why I have to drop the trailer in so far which allow the back to float around till I start pulling out. Share this post Link to post Share on other sites
kelleyja 0 Report post Posted August 21, 2014 The boat does not need to touch the cross member, the bunks and bow roller will support it Share this post Link to post Share on other sites
Rip5 0 Report post Posted August 25, 2014 two center bunks is better than guide polls Share this post Link to post Share on other sites