Jump to content
My Monterey

garybeez

Members
  • Content Count

    11
  • Joined

  • Last visited

Posts posted by garybeez


  1. MOST, can you check to see what the "FASTBACK" # is? Taylor said they can't find the # as it's the same as the rear top. I got those #'s from a previous discussion here.

     

    The vendor in 2004 for the 322 Cruiser canvas was TaylorMade. On line is www.taylormarine.com/canvas/index.html and telephone is 518-773-0636 in New York. The part numbers were:

     

    ONYX

    A1 CANN-BT-6047-BLK 1 EA 322CR TAYLOR BIMINI BLK (#60470008011) $1.024.25

    A2 CANN-RT-6047-BLK 1 EA 322CR TAYLOR REAR TOP BLK (#60470008041) $1,055.74

    A3 CANN-FB-6047-BLK 1 EA 322CR TAYLOR FASTBACK BLK(#60470008041)

    A4 CANN-SC-6047-BLK 1 PR 322CR TAYLOR SIDE CURT BLK (#60470008111) $336.42 PAIR

    A5 CANN-WS-6047-BLK 1 EA 322CR TAYLOR WINDSCREEN BLK (#60470008071)- $382.93


  2. I did cotact my local Kohler dealer... This is what happened. Because I don't use the generator the fuel pump piston gummed up from the stale gas. This shorted the relay on the circuit board which also shorted the voltgage regulator. New fuel pump, Circuit board, voltgage regulator & 2 hours srevice call = $700.00 Leson learned... Use your generator at least once per week. It even says to do this in the manual.


  3. Hi Everyone:

     

    The "input" fuse keeps blowing evertime I try and start the genset. I disconnected the electric choke to make sure that wasn't the problem. Then I was told by the local shop to disconnect the voltgage regulator. It would stay running as long as you held the start button in with that disconnected and it wouldn't blow the fuse. Do you think its a safe bet to replace the voltgage regulator @ $200.00 bucks. I only have 10 hours on it.

     

    thanks for your help.

    Gary

    Garybeez@aol.com


  4. My Tachometer is all of a sudden not accurate. The engine RPM is running fine, however i notice that the tach is inacurte, the needle kind of floats up higher than the motor RPM is acturally running. Is this a bad Tach or is there a ground wire that could be causing this.

    This tach is in a 2002 Monerey 262 with a 5.7 Motor Mercruiser. The tach is a Faria Tach w/Hourmeter,

     

    Help

     

    I have a 2004 322 that does the same thing on both tachs. I have to tap on them to get them to read corectly. It's a real pain when trying to sinc the engines while running.

     

    Gary B


  5. Hi: I took my "ice box" out and installed a fridge. We kept the one in the cabin for food and the new one under the wet bar for drinks. Domestic sells one that is very close to the same size as the ice box. I only had to shave off a 1/4" off of the opening. Very eazy to do. Also have to do a little wiring and add a circuit breaker. I sold the boat last last year and now have a 322 that has a ice maker. I think I would rather have a fridge. If it ever breaks I will replace it with a fridge.

     

    Good luck

    GaryBeez@aol.com

×
×
  • Create New...