Jump to content
My Monterey

timh8000

Members
 View Profile  See their activity

  • Content Count

    16

  • Joined

  • Last visited

Posts posted by timh8000

  6. Posted · Report reply

    <!--quoteo(post=1081:date=Aug 3 2008, 10:08 PM:name=timh8000)--><div class='quotetop'>QUOTE(timh8000 @ Aug 3 2008, 10:08 PM) <a href="index.php?act=findpost&pid=1081"><{POST_SNAPBACK}></a></div><div class='quotemain'><!--quotec-->Has anyone figured out how to add a small cockpit table in front of the back seat on a 298 ss. Ideally, I would like to avoid drilling/cutting and just use the existing hole where there is a latch to open and close/lock the storage under the drivers side. The only problem with replacing the latch is that a simple table base won't keep the storage area locked down.

     

    Any thoughts?<!--QuoteEnd--></div><!--QuoteEEnd-->

     

     

    I just bought an 03 298 SS and I'm also interested in installing a table. any suggestions from MOST or anyone else? Thanks!

     

     

     

    I found a spot to install the table. You need to put the pole in the aft starboard part of the boat AND you need a pole that bends at a 90 degree angle to support the table (this allows for the pole to be pretty much out of the way of people sitting). Watch placement so that you can open the rear seat for access to the cooler.

  7. Posted · Report reply

    do you like the Nuteak swim platform? How much did it cost you? I would like to do the whole boat.

     

    Thanks,

    Scott

     

    Can't remember how much, but you can call or e-mail nuteak and they will give you an idea. I had someone install is for me. I think around $1,300 (including the big step into the boat and the fender holders). Keep in mind that it does get hot in the bright sun. There is a good article in practical sailor that compares the various brands.

     

  8. Posted · Report reply

    My marina service lost some of the hardware from my 2006 298 ss. Most can you help with part #'s and where to get replacements to the following:

     

    1. Wind door (between cockpit and bow) locking mechanism in the middle of the door.

     

    2. Wind door mounting hardare to fix to the boat.

     

    3. Inside Latch( or catch) for the door to the battery switches and breakers (located in the port/stern part of the cockpit).

     

    4. Also, what are the snaps/sizes/types on the cockpit cover and bimini?

     

    Thanks.

  9. Posted · Report reply

    Is there a template available to send to flexi teak? I want to use this material or a similar material for the entire cockpit and swim platform.

     

     

    I have a 2006 and had Nuteak make a swim platform. They have the template for the swim platform for sure.

  11. Posted · Report reply

    I have a 2006 Monterey 298 ss. On the rear port side (right about where the sling sign is) there is are three stainless steel openings (top to bottom). The top opening appears to be a vent. I'm not sure what the next opening is. I was stopped by a Lake patrol that asked me to close up the vent if this is related to the sink. Can you let me know what this is?

  12. Posted · Report reply

    I have a 2006 298 ss I purchased last summer. This is a great day boat. I purchased this in long island, NY and drove it to the hudson river and then up to Albany. It handled great in the ocean (decent sized waves) and cruised the hudson in no time (twin volvo 320's). I dock the boat in Lake George where the waves can get a bit high when the wind kicks up, but I had zero trouble with the waves (people on the bow had to get used to relaxing when a big wave came. they were used to our old 5k pound 27' Regal which bounced around a bit. This boat is 8k + pounds and handles the waves easily). Perfect for a big lake. The boat can sit 8 people very comfortably and the aft cabin allows for tons of storage and can sleep two for weekend trips.

     

    The only issues I have had are small ones: 1) no table (adding one this winter), 2) Some moisture seems to get stuck in the aft cabin rug towards the back (looking at replacing rug with synthetic wood or snap in carpet), 3) the bow cover is taking on water because it is not a tight fit (fixing), and 4) the step down bathroom is a steep step (I added a step so my mom could get in and out).

     

    I looked at the Regal and Formula big bow riders, but I just could not see the value as compared to monterey - and no aft cabin. Good luck.

     

  15. Posted · Report reply

    Has anyone figured out how to add a small cockpit table in front of the back seat on a 298 ss. Ideally, I would like to avoid drilling/cutting and just use the existing hole where there is a latch to open and close/lock the storage under the drivers side. The only problem with replacing the latch is that a simple table base won't keep the storage area locked down.

     

    Any thoughts?

×
×
  • Create New...