jktreutler6 0 Report post Posted June 19, 2014 Boat lift setup for 2002 322CR. Looking for advice on setup of boat lift bunks. Boatlift has 12" aluminum bunks with rubber caps. How far apart aft. How far apart forward and at what length from the aft ends of the bunks is the forward part measured? I have extensions to raise the bunks to greater than 12" high off the cross beams. Current setup is bunks parallel 6 feet apart and 18" high. Previous setup was for an albin 31 TE that had the keel on the cross beams and used bunks for stability. Share this post Link to post Share on other sites
griff 0 Report post Posted July 7, 2014 Hi JK: Are you installing your own lift? We have a Deco 20K 6 piling lift for our boat. The construction company set the bunks up for us and they were not spread apart very far. Have had the boat and lift 5 years now with no problems. Griff Share this post Link to post Share on other sites