PGI CONCH 0 Report post Posted August 13, 2020 Looking for 282 owners that have had an engine removed. Need some answers regarding the engine removal process specifically on the 2004 282 CR model boat. 1. Did the generator have to be removed for clearance? 2. How was a hoist & chain attached? To the standard eyes? 3. Besides removing the exhaust risers, cowling and flame arrestor, did the manifolds also have to come off? 4. Any other issues/advice/recommendations? TIA. Share this post Link to post Share on other sites
SkeletonShores 0 Report post Posted October 2, 2021 I am also curious about this. I may soon need to repower my 2005 282, and I can't figure out how the chain can be attached to pull the motors. Has anyone had a repower done that can explain how they removed the motors? Thank you. Share this post Link to post Share on other sites
stouchton 0 Report post Posted March 8, 2022 Just curious if either of you had this done, and how it was accomplished. Thanks Share this post Link to post Share on other sites
blacklake282 0 Report post Posted September 27, 2022 I have removed both my engines twice - 2004 282 CR, mercruiser 5.0 Mpi. it´s a major job and a lot of things needs to be removed........ generator, waterheater, floor in compartment at the stern, bracket to switches on exhaust.... then you can use the chains buti strongly rekommend at lift beam or heavy duty crane. Share this post Link to post Share on other sites
