Ian 0 Report post Posted May 5, 2009 Hi, Anyone here own a 340SY? I wanted to obtain some info / pics of the head shower seat to see if I'm able to retrofit a 330SY Thanks Share this post Link to post Share on other sites
Mojito 0 Report post Posted June 12, 2009 I do have a 330sy, and the 340sy is exactly the same boat, even on dimension but with a few enhancements. I didnt know that the head was different, what exactly the difference is? Share this post Link to post Share on other sites
Ian 0 Report post Posted June 23, 2009 I do have a 330sy, and the 340sy is exactly the same boat, even on dimension but with a few enhancements. I didnt know that the head was different, what exactly the difference is? I have only seen the photos in the brochures of the 340SY. (see link) http://www.montereyboats.com/ssp_director/...Head_2_copy.jpg In the bottom left hand corner of this photo, you can the edge of the toilet bowl and seat. Above it is a hinged shower seat similar to what is fitted to the 350 and the older 322. The shower seat sits approx. 1-2" above the toilet lid. The shower seat also has molded slots for drainage You can also see this seat is supported by a "lip" in the vertical face of the cabinet fibreglass / acyrlic I was trying to find a part no. / manufacture. Regards Share this post Link to post Share on other sites
Stella Blue 0 Report post Posted November 4, 2010 I just recently purchased a 2007 330 I know exactly what you mean - did you find a part and seat? Share this post Link to post Share on other sites
Ian 0 Report post Posted November 5, 2010 Hi Stella Blue The manufacturer was a company called Teak Isle Manufacturing 401 Capitol Court Ocoee FL 34761 The contact I had was Pat Brown PBrown@TeakIsle.com who was very helpful. Their website is www.teakisle.com I think you will have to buy through one of their agents / re-sellers but they will give you a list of those closest to you. The Teak Isle part no. is SEAT-POLY#20-18528 The Monterey part no. is #45907016-00-SEAT POLY SHWR CF/CD. The seat is actually from a SY310 and is the same as the 330 and 340 If you don't have the lip moulded into the vertical faces of the head walls / cabinet, you will need to fit some cleats to support the seat. You will probably have to buy these through a plastics fabricator as Teak Isle don't make them for retro-fits Hope this helps some Regards Ian Share this post Link to post Share on other sites