Drop in carpet for CR 250

[Drop in carpet for CR 250]

Does anyone know where I can get a templet for the drop in carpet that Monterey used in 2008 or what carpet manufacture that they used. All help would be greatly appreciated.

[Rocker switch]

Looking where to find a 2008 CR250 cockpit light rocker switch. Trying to find the same one . All help appreciated!,

[Snaps on boat]

How do you replace the snaps that look like they are riveted into the boat

[Snaps on boat loose]

I have a 2008 cr 250 that has some canvas snaps that are very loose. The ones with the screws in them I know how to repair / replace but the other ones that don't have the screw and look like they are riveted in the boat are the issue. Do you just drill them out and fill with epoxy then put in a new snap that scares in or am I missing something 

[Hot water issue on cr250]

I took the faucet head off and apart and cleaned it. The problem seems either to be an obstructed line or the pump not producing enough pressure. I am at a lost with this issue

[Hot water issue on cr250]

I have a 2008 cr250 that I am looking for help in solving and fixing a low hot water pressure in the head shower. I have good pressure in the galley and transom. Is it possible to blow the line out from the facet or should I try and clean the water heater.

[How to clean cockpit cover]

Thanks for the link. Do you ever boat in st Clair

[How to clean cockpit cover]

I have a 2008 cr250 and was wondering on the best way to clean the cockpit cover. Also after cleaning should I put a coat of 303 fabric guard on it. The cover has a tag on it stating it was made by taylor made. Any suggestions would be greatly appreciated.

[faria tach/hour meter gauge replacement]

Thank you for the info. I took it apart today and sent the gauge in. I sure hope everything else on that boat is as easy to fix

[faria tach/hour meter gauge replacement]

Looking for some information on replacing a bad hour meter on my 2008 cr250. looking at the dash it looks like just 4 screws holding the frame in that holds all the gauges. Having never worked on a boat before this seems to easy or I'm I just seeing the calm before the storm. Any help on this would be greatly appreciated.