Jump to content
My Monterey
Glassman

276 Shower Sump area to Bilge Drain

Recommended Posts

Can't get water to drain from the shower sump area in the cabin sole to the bilge. Got snake to run through one of the (2) drain tubes, but can't get through the other. Should both drains be continuous from front to back. Can't figure out why water is not draining through at least the seemingly clear tube.

Water only seems to collect in this area after exterior wash.

Share this post


Link to post
Share on other sites

There are 2 tubes side by side under the shelf that the shower sump sets on. I've snaked both sides and have only been able to get through twice. One of the times the snake came out of the other tube, as mentioned, they are side by side. This leads me to believe there's a cavity somewhere.

I can shoot water into the 2 tubes draining into the engine bilge but nothing drains back out, inter in fill up the cabin bilge.

I'll keep you posted.

Share this post


Link to post
Share on other sites

They are 2 separate pumps for sure.  Have you opened up the pump?  From prior experience on another boat that primeless style of pump can jam up the outlet flow when they fail.  The teeth get hard and break off.    

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...