Dave A. 0 Report post Posted July 8, 2011 I have a 2006 234FS and the horn needs to be replaced. I removed the cover, then was able to remove the mounting plate. I can slip my fingers into the hole and spin the horn around but no matter what angle I try I can't get it to clear the hole, the side bow railing is in the way. Is there a trick to getting the horn out? Do I have to remove the railing, if so how do I get to the fasteners holding it down? Do I remove the front speaker and pull it out through there? Any help would be greatly appreciated. Dave Share this post Link to post Share on other sites