Aussie Heath 0 Report post Posted August 30, 2011 Hi All My Navman 8084 is playing up. The Sonar/Fish Finder/Depth sounder doesn't seem to be working properly. The colours look to be inverted, the depth indication is intermittent and unreliable and it doesn't map the bottom at all. I haven't had the boat for very long and have never seen it working. The boat isn't antifowled so the transducer hasn't been painted over. I understand that this is a much maligned unit most of my enquiries with technicians have resulted in "its not worth repairing, just replace it!" The GPS/plotter and the engine interface work really well so I don't want to simply bin it! Any advice or words of wisdom would be appreciated (except for "just bin it!") There is a photo of the screen in action if any one is interested. Cheers H Share this post Link to post Share on other sites
Aussie Heath 0 Report post Posted October 6, 2011 Hi all, After much faffing around with this problem, it was a dead transducer. it seems during transport on the truck a support block was positioned under the transducer. Oddly enough the transducer wasn't built to hold the weight of the boat......... So in future if a technician says "just bin it" have another look, you might just find the problem with a bit of amateur troubleshooting. Cheers Heath Share this post Link to post Share on other sites