Tim Berry 0 Report post Posted January 21, 2014 I would like to replace the steering wheel on my 276 Cruiser. What is involved? It seems rather simple. I took of the cap, unscrewed the bolt, and now I am stuck. I am starting to wonder whether this is as easy as it looks. Share this post Link to post Share on other sites
Artemus 0 Report post Posted January 24, 2014 Its likely on a tapered shaft with a keyway. If the end of the shaft is threaded and sticking out from the steering wheel, put the nut back on part way, pull on the steering wheel while hitting the shaft with a rubber mallet. DO NOT use a steel hammer, as it will damage the threads. If it is a indeed a bolt that holds it on, [not a nut] put the bolt back in part way and do the same thing. The steering wheel should come free. Share this post Link to post Share on other sites