Replacement prop for 2001 200LS Montura

[PDitheridge 0]

I need to replace the original prop on my 200 LS. I'm thinking about replacing the aluminum prop with stainless steel.

Does anybody have any recommendations on size, type (brand) etc?

[Rip5 0]

What is the diameter and pitch of the 3-blade prop you have? What is the engine, sterndrive and horespower of your power package ?

[PDitheridge 0]

What is the diameter and pitch of the 3-blade prop you have? What is the engine, sterndrive and horespower of your power package ?

 

Unfortunately, I have absolutely no idea of the pitch or diameter as pretty much all markings have worn off the prop and lower unit (not sure where else I can get this info)

The engine is a Mercruiser 4.3L EFI V6. 220 hp. Alpha One lower unit

Thanks

[Rip5 0]

With that engine and drive, I'm 90% sure the stock prop would be a 14.5" x 19 3 blade. If your RPM were within the

manufacturer's recommended range with your current prop, you should be fine with an OEM replacement.

A replacement for that size is a Michigan Wheel Vortex High Performance 3 blade prop # 992004. Or an OEM replacement

Michigan Match 3 blade prop # 031065.

[PDitheridge 0]

Thanks - appreciate it!

[RBrown 0]

I have the same boat with a 5.0 Volvo Penta. Mine has a 14.5” 19 pitch Stainless Steel Solas prop. It comes out of the hole quickly and has a top speed of 52 mph at around 5k rpm.