Jump to content
My Monterey
Sign in to follow this  

trailer problems

Recommended Posts

I have a 1998 242 cc with a 2011 venture dual tandem trailer. It has two rear bunks that cover the whole bottom of the boat, and one cross member with a v bunk on it.


My question is with the boat all the way on (bow hook touching bow roller) should the boat be touching the cross member?


mine is about a finger tip off the cross member.


Also, I'm having the hardest time keeping the boat straight on the trailer when loading it. I've heard of changing the cross member with two center bunks, or installing guide polls. Which would work better? also this boat weights in a 5,200 lbs fully loaded. and my marine does not allow power loading. so diving the boat on will not work, that's why I have to drop the trailer in so far which allow the back to float around till I start pulling out.






Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...