Tbone 0 Report post Posted February 17, 2016 I am looking for the windshield surround foam trim used to cover the mounting screws for the windshield frame. TaylorMade tells me the original part is no longer produced and they need the part number of the windshield frame assembly so that they can cross reference to the replacement trim product. Also do you have the part numbers for all of the canvass for the 322 specifically the poles / supports and canvass for the camper option. Share this post Link to post Share on other sites
stephje 0 Report post Posted March 8, 2016 I own a 2002 , 322 cruiser and experienced the same issue with the windshield screw cover. I measured the channel width and then relied on the internet to locate a molding that works. Look up Sea Ray and Bayliner windshield screw cover molding, I believe the channel is 1 " wide, but you will need to measure. Looks great after replaced! Good luck Share this post Link to post Share on other sites
Lilbit 0 Report post Posted May 10, 2017 If you still have the old covers and they are malformed....use a heat gun to soften them up and work them back into the windshield frame. Be careful, slow and steady wins the race!! Share this post Link to post Share on other sites
