Twilkes 0 Report post Posted July 6, 2008 The Origo micro on my 04 265 powers and seems to run as expected but there is no heat generated after any cycle at any power setting. Probably not worth the effort to diagnose and repair so I figured I'd just remove and replace it. Thought that it would just slide out and I removed 2 Phillips screws exposed when opening the door. It now moves inside the enclosure but feels as though something is holding it in the middle from the bottom. There is a small panel above the micro that seems to be held in place by some vertical screws and I have removed 3 Phillips screws (one about 3" long) from the storage area above the micro but the panel hasn't moved and access is still difficult. I'm sure there is some simple process I 'm missing here - any help is greatly appreciated. Tom Share this post Link to post Share on other sites
DWE 0 Report post Posted July 10, 2008 I too have a 2004 265 and my microwave would not power up at all. I did everything you did and never did get it out and fortunately for some strange reason it just started working so I did not have to remove it. let me know when and if you ever figure it out. Thanks and good luck Share this post Link to post Share on other sites
box-of-rain 0 Report post Posted July 15, 2008 I just removed the microwave on my 262 because I preferred to have the empty space and because I never used the microwave to begin with, the "wood" piece above the microwave holding in down and secure is not screwed in, at least on mine it slid out with a little effort. once that was out I had about 1/2" play and it came right out. Share this post Link to post Share on other sites
Twilkes 0 Report post Posted July 17, 2008 Hmmmm.... I have the screws removed from the top piece but it still feels very firmly positioned. I must be missing a screw somewhere (my wife would tell you i definitely have a couple loose). I'll look at the sides again. Thanks for your reply Share this post Link to post Share on other sites
Twilkes 0 Report post Posted July 19, 2008 So maybe I should try jumping some cruise ship wakes and hope for the best. The most likely outcome might be having the micro work but getting the stereo stuck on something like the Hannah Montana channel. I'll keep working on extraction and let you know how it comes out (hopefully). Share this post Link to post Share on other sites
