Patrick 0 Report post Posted May 13, 2009 Greetings all, I hope the boating season is going well for everyone. I'm looking to find the hydrualic support arm that supports the engine compartment cover on my 1995 monterey 276. I accidentally fell back on it while I was working in the engine compartment. I heard the gas escape from it and it no loger supports the hatch in the open position. Any help or direction would be greatly appriciated. thanks alot, Patrick Buchanan Share this post Link to post Share on other sites
The MOST 0 Report post Posted May 19, 2009 Hello Patrick, I hope you didn't hurt yourself when you fell! The information on that gas spring is no longer in the system however, it was most likely an Attwood product and probably a 70# spring. You will find the part number on the side of the spring in very tiny white letters. If you cannot locate an entire part number try to confirm the pressure (50 lb, 60 lb, 70 lb etc.) that number is usually on one end. The phone number to Attwood is 616-897-9241 and on line at attwoodmarine.com under the "Springs" category. Share this post Link to post Share on other sites