Sunburns 0 Report post Posted January 23, 2013 My shower /head bilge pump stopped working last year. What would be the replacement model for this? I had wrote it down before I put the boat away for the winter and can't find what I wrote. It is the bilge pump that is under the steps that go down into the cabin and is located within a large plastic covered tray. Thank You, Ken Share this post Link to post Share on other sites
Rip5 0 Report post Posted January 24, 2013 You may mean the shower sump. Stock Attwood pump is all you need. Can get on-line many places. Amazon it's about $86.00. I would recommend the 750. Share this post Link to post Share on other sites
Heinrich 0 Report post Posted January 25, 2013 Ken, I had to replace the same pump a whie back on my boat (also 2007 270 cr)... got the same one from Wallmart (of all places!) for $+- 39 - search their site for Sahara 500 Automatic Bilge Pump, (12 volt) (was cheaper than even West Marine - of course West Marine does do price matching). Took about +-15-30 min to replace... biggest job was cutting the wires, soldering and using heat shrink.... Btw, this was already covered in the forum at: http://forums.montereyboats.com/index.php?showtopic=853&hl=sahara Share this post Link to post Share on other sites
jim248jax 0 Report post Posted April 21, 2013 Is the shower sump ever factory wired to work manually via an acc switch at the helm and as an automatic pump using a float? Share this post Link to post Share on other sites