Raw Water Impeller Change

[Dan 0]

So I change my sea water impeller today and figured I'd do a video. Hope this helps some folks out.

 

http://www.youtube.com/edit?video_id=eZYJq746awc&video_referrer=watch&ns=1

 

Feel free to ask questions if you need.

 

Dan.

[GetAway 0]

So I change my sea water impeller today and figured I'd do a video. Hope this helps some folks out.

 

http://www.youtube.com/edit?video_id=eZYJq746awc&video_referrer=watch&ns=1

 

Feel free to ask questions if you need.

 

Dan.

 

I couldn't get your youtube video to work.

[262 in sunny FL 0]

I can't get the video to load.

[Dan 0]

Hmmm, I've got it set to public. What type of errors are you guys getting? Go to You Tube and search for "Bravo III Sea Water Impeller". My video is the Raw Water Impeller R&R. Let me know if it works.

 

Dan

[262 in sunny FL 0]

When I click it it goes to my own personal videos, not to yours.

[Dan 0]

Humm, not sure what's happening......I'll post the link again.

 

 

If that doesn't work, try pasting this "youtube.com/watch?v=eZYJq746awc" with the "www" in front.

[BrianNJ 0]

Thanks for this. I have heard that at least some boats have quick disconnects for the hoses that lead from tha pump. Do you know if yours does? Also, I hav heard of folks that leave the backing plate connected to the hoses and just remove the bolts to open the pump somewhat in place. Do you think that would be easier or harder?

[Dan 0]

My boat did not have quick disconnects and because I have the Gen III cool fuel module, access to the bolts is very difficult. Removing the whole pump was a better option for me.

[TexasAggie 0]

What year model did the Gen III cool fuel module appear (I have an '03 350 MAG Bravo 3)?