rio man 0 Report post Posted August 4, 2008 A few weeks ago my tilt was stuck in the up position. A friend shook the lower unit and it started working. It has ok until yesaterday I parked it in my shop after returning from the water and I tryed to lower the unit and it was stuck again. I did add some fluid just before the first time and yesterday I took the top off of the resevoir and it had pressure on it.If anyone could help I would appreciate it. It would save a 100 mile trip to the dealer. Thanks! Share this post Link to post Share on other sites
beau 0 Report post Posted August 8, 2008 A few weeks ago my tilt was stuck in the up position. A friend shook the lower unit and it started working. It has ok until yesaterday I parked it in my shop after returning from the water and I tryed to lower the unit and it was stuck again. I did add some fluid just before the first time and yesterday I took the top off of the resevoir and it had pressure on it.If anyone could help I would appreciate it. It would save a 100 mile trip to the dealer. Thanks! This might be a long shot (since shaking it seemed to work) Open the hatch to the engine. have somebody hit the trim switch. do you hear the relay click? Share this post Link to post Share on other sites
