EastCoastB
Members-
Content Count
35 -
Joined
-
Last visited
-
Glad you had an easy fix..... I will say that Raymarine has AWESOME support! Have a c70 and the vhf by raymarine and when I had an issue, I received top notch support!
-
What are your recommendations for fixing this issue?
-
MOST - Where do I get these things?
EastCoastB replied to EastCoastB's topic in Technical Discussion
Any chance you can sell me a 6 pack of these things or where I can buy them online? -
MOST - Where do I get these things?
EastCoastB replied to EastCoastB's topic in Technical Discussion
Unfortunately I don't have a Monterey dealer near me. -
Easy enough! Thanks! I turned the gold bezel and the whole unit seemed to come loose, just a bit, but no signs of any screws that I can get at. Do you have brand name so I can search for a parts breakdown? Thanks!
-
On my 330, the arch has recessed lights. How do they come out so I can replace the bulb? Pulled the arch access panel off but no way of reaching over to the lights, too far away and not much room in there. The AB switch in the radio/dvd cabinet, is that for switching between antenna and cable?
-
2007 330SY - The overhead panel just as you enter the cabin is coming down. I was able to see and pull out 3-4 of the white fasteners that had broken. They are double sided white fasteners. Where can I buy these things? Checked with the auto stores and nothing even close.
-
Thanks! I'll give them a call!
-
Ticking Noise - 350 mag - Corsa Q&C exhaust?
EastCoastB replied to ErikS's topic in Technical Discussion
I had the same issue with the stock merc quick and quiet.. thought it was the valves at first, then learned it was the diverters.. the ones I had from merc had a rubber sleeve mounted on the outer edges of the butterfly on the inside of the diverter. When the rubber burns up or wears out, then the ticking begins... only way to repair is to pull the diverter off. That was my experience, the corsa may be setup differently... to remove, just had to pull the riser portion only(sits on top of the exhaust manifold)of the exahaust manifold off to make room for backing off the flexible exhaust hose components... really pretty easy job... -
I have the teak swim deck option on my 330 and the 4 areas around the engine hatch hinge and another area over by the cockpit entance are starting to lift. When you step on these areas, water will actually squirt out. I have the boat in the garage for the winter and would like to fix this problem before it gets worse. MOST: How would you recommend fixing this and what products to use for resecuring the teak and black caulking the edges? This is a 2007 boat and I've been keeping the teak sealed throughout the summer. THanks.
-
I have the factory kenwood subwoofer in my 330... be sure when installing it to back the speaker with heavy one sided taped foam, you can get at any hardware store. The vibration from the speaker travels through the fiberglass for unwanted sound.... the foam isolates this problem... setting the equalizer on the kenwoods is another chore in itself for the novice.... which I am...
-
On both my cockpit cover and aft enclosure cover for my 330, there are these black plastic pulls which help get the cords around the knobs just below the aft sunpad when securing it in place. Where can I get a few extra of these?
-
This is from a 330 I happen to see at a marina....
-
Absolutely love our 330!!!! As with any boat, having a few minor issues but nothing that can't be corrected. Overall, great boat for the money, awesome layout and innovative design. We get a LOT of comments from people on how nice the boat shows. Everyone loves all the stainless, the dash, cabin layout and sun island! And for the size, it runs great! Hey Mojito!
-
One of the best things you can do if towing with the cockpit cover snapped on is to run painters tape across the front of the cover which will preven wind from coming up under the cover and blowing it off. Preventing that wind from going under the cover will save you a lot of headaches and as someone mentioned stress on the cover and snaps. since you will get some air from the sides of the cover, don't ever tape the cover across the back of the boat. It still needs that area to vent out.... Since I've been using this method I've never had any issues with the cover and I've covered thousands of miles.... Good Luck!