Sunburns 0 Report post Posted March 19, 2011 To Most: I have a 2007 Monterey 270CR Cruiser that I purchased with the optional camper canvas. There are connector pieces that connect multiple tubes ( specifically on the rear most assembly) I need to replace the "Screw" as the head came off due to rust as I was unscrewing with a screw driver. What would be the manufacturer of the canvas stainless assembly tubes and the screws needed on the connector pieces? I have attached 2 pictures for reference. Thank You! Ken Quote Share this post Link to post Share on other sites
RSUMRTOY2 0 Report post Posted March 22, 2011 Ken, have you tried West Marine, other outfitters or canvas shops? I have over the years needed replacements and found them quite easily...Good Luck! Quote Share this post Link to post Share on other sites
Sunburns 0 Report post Posted March 24, 2011 Ken, have you tried West Marine, other outfitters or canvas shops? I have over the years needed replacements and found them quite easily...Good Luck! Thanks! I did look at some sites and have seen only a replacement for the Steel Top Slide in 7/8 or 1 inch sizes...I think I only need the screw.....have not seen these as separate items yet anywhere...... Hopefully MOST will let me know specific on this....otherwise, on Saturday, i am picking up some zipper repair on my canvas at my local canvas shop and will ask them...... Ken Quote Share this post Link to post Share on other sites
The MOST 0 Report post Posted March 24, 2011 Hi Ken, The manufacturer of your canvas hardware is: Taylor Made Systems Taylor Made Group, LLC 93 South Boulevard Gloversville, NY 12078 PH: 518-773-0636 FX: 518-773-2919 REPLACEMENT OR SERVICE PARTS and ** ALL DIRECT-TO-CONSUMER INQUIRIES ** CUSTOMER SERVICE: 518-773-0636 If you are a boat owner, marina, service yard, or other non-O.E.M. customer (i.e. not the manufacturer of the original boat), please call the number above for the fastest service. Or Fax: 518-773-2919 / Email: tms@taylormadesystems.com I am certain they will be able to help you with those screws. I do not have a part number for it so you might have to email your photos!! Quote Share this post Link to post Share on other sites
Sunburns 0 Report post Posted March 24, 2011 Hi Ken, The manufacturer of your canvas hardware is: Taylor Made Systems Taylor Made Group, LLC 93 South Boulevard Gloversville, NY 12078 PH: 518-773-0636 FX: 518-773-2919 REPLACEMENT OR SERVICE PARTS and ** ALL DIRECT-TO-CONSUMER INQUIRIES ** CUSTOMER SERVICE: 518-773-0636 If you are a boat owner, marina, service yard, or other non-O.E.M. customer (i.e. not the manufacturer of the original boat), please call the number above for the fastest service. Or Fax: 518-773-2919 / Email: tms@taylormadesystems.com I am certain they will be able to help you with those screws. I do not have a part number for it so you might have to email your photos!! Thanks MOST!! Do you happen to have the canvas tubing size? 7/8 or 1 inch? Quote Share this post Link to post Share on other sites
The MOST 0 Report post Posted March 25, 2011 Hi Sunburns, The Taylor Made canvas hardware is 7/8" in diameter. Quote Share this post Link to post Share on other sites
lehighalums 0 Report post Posted August 17, 2015 Hey MOST, I have the same boat, with full camper canvas by TaylorMade. I need to get a new front plastic window for the starboard side, but all the TaylorMade tags are blank and don't list the part number for the top. Where else can I find that? Thanks! Quote Share this post Link to post Share on other sites
Rip5 0 Report post Posted September 1, 2015 Have a local shop make a replacement. Easier, cheaper, quicker and simpler Quote Share this post Link to post Share on other sites